Hi David,
It seems that you are using the X- Series device NI PXIe-6358 on the NI PXIe-1062Q PXI chassis. The command daq.getDevices returns you the device and not the chassis and thus you see PXI 6358 and not PXIe1062Q.
R2012a added a new functionality to set your devices reference clock to the PXI chassis backpane 10 MHz clock PXI_CLK10, so that all the modules in your chassis will share the same clock. However, in you case it seems to error out at that point. X-Series boards do support reference clock synchronization, so I not sure about the exact reason you are seeing this. However, you can disable this functionality using these commands:
daq.reset
daq.HardwareInfo.getInstance('DisableReferenceClockSynchronization',true);
You will need to use the command after every daq.reset. I would also recommend that you contact technical support regarding this issue so that they can get to the root of this problem.
Hope this helps,
Manisha
