|On this page…|
The following outline summarizes how the genetic algorithm works:
The algorithm then creates a sequence of new populations. At each step, the algorithm uses the individuals in the current generation to create the next population. To create the new population, the algorithm performs the following steps:
Scores each member of the current population by computing its fitness value.
Scales the raw fitness scores to convert them into a more usable range of values.
Selects members, called parents, based on their fitness.
Some of the individuals in the current population that have lower fitness are chosen as elite. These elite individuals are passed to the next population.
Produces children from the parents. Children are produced either by making random changes to a single parent—mutation—or by combining the vector entries of a pair of parents—crossover.
Replaces the current population with the children to form the next generation.
The algorithm stops when one of the stopping criteria is met. See Stopping Conditions for the Algorithm.
The algorithm begins by creating a random initial population, as shown in the following figure.
In this example, the initial population contains 20 individuals, which is the default value of Population size in the Population options. Note that all the individuals in the initial population lie in the upper-right quadrant of the picture, that is, their coordinates lie between 0 and 1, because the default value of Initial range in the Population options is [0;1].
If you know approximately where the minimal point for a function lies, you should set Initial range so that the point lies near the middle of that range. For example, if you believe that the minimal point for Rastrigin's function is near the point [0 0], you could set Initial range to be [-1;1]. However, as this example shows, the genetic algorithm can find the minimum even with a less than optimal choice for Initial range.
At each step, the genetic algorithm uses the current population to create the children that make up the next generation. The algorithm selects a group of individuals in the current population, called parents, who contribute their genes—the entries of their vectors—to their children. The algorithm usually selects individuals that have better fitness values as parents. You can specify the function that the algorithm uses to select the parents in the Selection function field in the Selection options.
The genetic algorithm creates three types of children for the next generation:
The following schematic diagram illustrates the three types of children.
Mutation and Crossover explains how to specify the number of children of each type that the algorithm generates and the functions it uses to perform crossover and mutation.
The following sections explain how the algorithm creates crossover and mutation children.
The algorithm creates crossover children by combining pairs of parents in the current population. At each coordinate of the child vector, the default crossover function randomly selects an entry, or gene, at the same coordinate from one of the two parents and assigns it to the child. For problems with linear constraints, the default crossover function creates the child as a random weighted average of the parents.
The algorithm creates mutation children by randomly changing the genes of individual parents. By default, for unconstrained problems the algorithm adds a random vector from a Gaussian distribution to the parent. For bounded or linearly constrained problems, the child remains feasible.
The following figure shows the children of the initial population, that is, the population at the second generation, and indicates whether they are elite, crossover, or mutation children.
The following figure shows the populations at iterations 60, 80, 95, and 100.
As the number of generations increases, the individuals in the population get closer together and approach the minimum point [0 0].
The genetic algorithm uses the following conditions to determine when to stop:
Generations — The algorithm stops when the number of generations reaches the value of Generations.
Time limit — The algorithm stops after running for an amount of time in seconds equal to Time limit.
Fitness limit — The algorithm stops when the value of the fitness function for the best point in the current population is less than or equal to Fitness limit.
Stall generations — The algorithm stops when the weighted average change in the fitness function value over Stall generations is less than Function tolerance.
Stall time limit — The algorithm stops if there is no improvement in the objective function during an interval of time in seconds equal to Stall time limit.
Function Tolerance — The algorithm runs until the weighted average relative change in the fitness function value over Stall generations is less than Function tolerance. The weighting function is 1/2n, where n is the number of generations prior to the current.
Nonlinear constraint tolerance — The Nonlinear constraint tolerance is not used as stopping criterion. It is used to determine the feasibility with respect to nonlinear constraints. Also, a point is feasible with respect to linear constraints when the constraint violation is below the square root of Nonlinear constraint tolerance.
The algorithm stops as soon as any one of these conditions is met. You can specify the values of these criteria in the Stopping criteria pane in the Optimization app. The default values are shown in the pane.
When you run the genetic algorithm, the Run solver and view results panel displays the criterion that caused the algorithm to stop.
The options Stall time limit and Time limit prevent the algorithm from running too long. If the algorithm stops due to one of these conditions, you might improve your results by increasing the values of Stall time limit and Time limit.
The selection function chooses parents for the next generation based on their scaled values from the fitness scaling function. An individual can be selected more than once as a parent, in which case it contributes its genes to more than one child. The default selection option, Stochastic uniform, lays out a line in which each parent corresponds to a section of the line of length proportional to its scaled value. The algorithm moves along the line in steps of equal size. At each step, the algorithm allocates a parent from the section it lands on.
A more deterministic selection option is Remainder, which performs two steps:
In the first step, the function selects parents deterministically according to the integer part of the scaled value for each individual. For example, if an individual's scaled value is 2.3, the function selects that individual twice as a parent.
In the second step, the selection function selects additional parents using the fractional parts of the scaled values, as in stochastic uniform selection. The function lays out a line in sections, whose lengths are proportional to the fractional part of the scaled value of the individuals, and moves along the line in equal steps to select the parents.
Note that if the fractional parts of the scaled values all equal 0, as can occur using Top scaling, the selection is entirely deterministic.
Reproduction options control how the genetic algorithm creates the next generation. The options are
Elite count — The number of individuals with the best fitness values in the current generation that are guaranteed to survive to the next generation. These individuals are called elite children. The default value of Elite count is 2.
When Elite count is at least 1, the best fitness value can only decrease from one generation to the next. This is what you want to happen, since the genetic algorithm minimizes the fitness function. Setting Elite count to a high value causes the fittest individuals to dominate the population, which can make the search less effective.
Crossover fraction — The fraction of individuals in the next generation, other than elite children, that are created by crossover. Setting the Crossover Fraction describes how the value of Crossover fraction affects the performance of the genetic algorithm.
The genetic algorithm uses the individuals in the current generation to create the children that make up the next generation. Besides elite children, which correspond to the individuals in the current generation with the best fitness values, the algorithm creates
Crossover children by selecting vector entries, or genes, from a pair of individuals in the current generation and combines them to form a child
Mutation children by applying random changes to a single individual in the current generation to create a child
Both processes are essential to the genetic algorithm. Crossover enables the algorithm to extract the best genes from different individuals and recombine them into potentially superior children. Mutation adds to the diversity of a population and thereby increases the likelihood that the algorithm will generate individuals with better fitness values.
See Creating the Next Generation for an example of how the genetic algorithm applies mutation and crossover.
You can specify how many of each type of children the algorithm creates as follows:
Elite count, in Reproduction options, specifies the number of elite children.
Crossover fraction, in Reproduction options, specifies the fraction of the population, other than elite children, that are crossover children.
For example, if the Population size is 20, the Elite count is 2, and the Crossover fraction is 0.8, the numbers of each type of children in the next generation are as follows:
There are two elite children.
There are 18 individuals other than elite children, so the algorithm rounds 0.8*18 = 14.4 to 14 to get the number of crossover children.
The remaining four individuals, other than elite children, are mutation children.